If the white cloth is not properly maintained after cleaning, it will show discoloration. In fact, when using PE tarpaulin, try to avoid contact between the tarpaulin and items that are difficult to clean, such as carbon ink. After cleaning, apply toothpaste or white chalk powder evenly to avoid discoloration. This method can also avoid discoloration by using another white paper on the tarpaulin after it is dry, We should still pay attention to the discoloration of PE tarpaulin, which can ensure that PE tarpaulin becomes more and more useful. I hope we can pay attention to it.
First, tarpaulin glue is generally used to repair holes and small-scale tearing of tarpaulin. In previous years, wax thread needlework was used to repair, which was not only expensive but also slow. Now with adhesive, the repair of tarpaulin is much simpler. The specific methods are as follows. Of course, if it is a leak type damage, two pieces of repair fabric slightly larger than the leak can be selected in advance, and the corners should be rounded when choosing. First, the outside of the tarpaulin shall be repaired. The side of the fabric pasted with PU shall be outward, which is more wear-resistant. Apply glue evenly, especially around the edge, and then stick it on. If you are not confident, you can apply another layer at the joint with confidence. Then repair the other side in the same way. In addition to the above methods, we can also learn from the method of repairing the tire. Use a file to slightly conflict the cut tarpaulin 2cm near the edge, so that the tarpaulin glue can be bonded better.
Since the tarpaulin is a tool for sheltering the wind and rain, it will show a moldy taste after a long time of use. As all friends who use the tarpaulin should know, we take out the tarpaulin when it rains, and we put it away when the rain stops. In this way, more tarpaulins will show a moldy taste of the tarpaulin. When we remove it, we need to know the cause of its moldy taste. Mold will grow in a humid environment, In order to prevent it from growing in a humid environment, we can support it and clean it with warm soapy water and sponge. Let the sponge be pasted with hot water and detergent to gradually scrub and clean the tent. The remarkable way to remove mold is to mix a cup of salt water, a cup of lemon juice and a cup of gallon of water together, and rub the solution of the mixture into the mold. It will have an unexpected effect after drying.